• Catoblepas@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    30
    ·
    4 months ago

    If you have an ice maker and a small cooler it’s way quicker to put them in the cooler and cover them with ice and water. You know, if you have a cold beer emergency and don’t want to wait for the freezer to cool it down. 5 minutes is plenty.

  • numberfour002@lemmy.world
    link
    fedilink
    English
    arrow-up
    16
    ·
    4 months ago

    I’ve tried all the “quick chill” methods I’ve heard of, but none of them work as quickly or as well as the icecream maker method. Watered down ice with some table salt. Set your unopened beer into a slurry like that, and in about 20 - 30 minutes, it’s surpremely cold. None of the “5 minutes and it’s ice cold” methods work as well or as quickly to be honest. At least not in my climate and in my experience.

    • cordlesslamp@lemmy.today
      link
      fedilink
      arrow-up
      11
      ·
      edit-2
      4 months ago

      There’s a cheap machine that dip the can in ice cold water and spin it really fast. It cool the can down to <5°C in less than 3 minutes. I think it’ll work even better with your salt method.

      Edit: changed the time and temp because it works even better than my memory.

        • TheOakTree@lemm.ee
          link
          fedilink
          arrow-up
          10
          ·
          edit-2
          4 months ago

          By spinning the can in ice water, it increases the rate of transfer of heat energy from the drink in the can, to the can itself, to the ice water. It’s like how stirring the ice in a cup of not-cold water will melt the ice / cool the water faster.

          At a molecular level, you would see an increase in the number of collisions between ice molecules and liquid molecules. The collisions must occur for heat transfer to happen, so more collisions = more cooling. It is also the same reason why a heatsink can draw more heat from a processor when a fan blows air over it (until the air is saturated with heat).

          • Pentel@lemm.ee
            link
            fedilink
            arrow-up
            4
            ·
            4 months ago

            How can air get heat saturated? i followed you thus far but its not like humidity, you can always add more heat the question is if a faster flow decrease the time for each molecule to absorb the heat/motion and thats why sometimes higher flow wont yield in better cooling

            • TheOakTree@lemm.ee
              link
              fedilink
              arrow-up
              4
              ·
              4 months ago

              Sorry, saturation is not the right word to describe it. I was thinking of the ice/water analogy and I mistakenly applied it to my heatsink analogy.

              The correct limit to the heatsink analogy would a function of the thermal dissipation of the heatsink (material, surface area, thermal resistance) and the qualities of the surrounding fluid (ambient temp, flow, etc). Honestly, my comparison between the ice/water example and heatsinks is not good. It is only appropriate in reference to the “molecular collisions” concept I mentioned before.

            • DefederateLemmyMl@feddit.nl
              link
              fedilink
              arrow-up
              2
              ·
              4 months ago

              How can air get heat saturated? i followed you thus far but its not like humidity, you can always add more heat

              When the temperature of the air and temperature of the object you want to cool reach an equilibrium, no heat gets transfered anymore.

          • Baku@aussie.zone
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            4 months ago

            Thanks for the answer! That’s pretty cool honestly. Could you achieve the same result with anything that spins, like a lettuce spinner?

            • Schmeckinger@lemmy.world
              link
              fedilink
              arrow-up
              3
              ·
              edit-2
              4 months ago

              You just need a way to spin the can. Probably works better if you speed it up and slow it down or reverse direction repeatedly.

              • Baku@aussie.zone
                link
                fedilink
                English
                arrow-up
                2
                ·
                4 months ago

                I think a lettuce spinner would probably work, since it has a basket inside a container. I might give it a go next time I buy a can of anything

            • TheOakTree@lemm.ee
              link
              fedilink
              arrow-up
              2
              ·
              4 months ago

              The main reason spinning a can works is because it induces convection inside and outside of the can, which contributes to more collisions and better distributions of collisions. If the warmest soda is in the middle of the can, the cold molecules near the can walls will reach a temperature similar to the ice bath and thud the rate at which heat is transferred becomes stunted.

              For lettuce, you’d have better luck finding a way to pass cold water between the leaves, much like having fins on a heatsink (surface area).

              • Baku@aussie.zone
                link
                fedilink
                English
                arrow-up
                3
                ·
                edit-2
                4 months ago

                No, a lettuce spinner is a little basket inside of a container with a handle that you can spin to turn the basket. You wash your lettuce and put it into the basket and turn the handle. The centrifugal force (I think) causes the water clinging to the outside of the lettuce to drain into the container.

                I think if you filled the container and basket partially up with ice or crushed ice) and some water, it’d achieve the same result as the machine someone linked above

                Lettuce Spinner

                • TheOakTree@lemm.ee
                  link
                  fedilink
                  arrow-up
                  3
                  ·
                  4 months ago

                  Lol… I have never heard of this before. I think it would help halfway, but it won’t induce much stirring inside of the can, which is more important than just throwing more cold molecules of water at it.

            • TurtleJoe@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              4 months ago

              Just use your hand. If the beer is in a bottle, leave it so the neck is sticking out of the ice water and spin it that way (this also works very well for wine.) If it’s a can, stick it in vertically, and spin it for 30 seconds at a time or whatever you can stand.

              Even if you aren’t constantly spinning it, it will still get cold much faster than any other method. I’ve worked in bars and restaurants for 15 years, and this is my go to, in case of emergency method for chilling beverages.

          • cordlesslamp@lemmy.today
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            4 months ago

            Neat explanation, thanks.

            I’ve seen a video explain how it works, plus an explanation on how it doesn’t make carbonated beverage cans explode when opening like if you shaken it. But I can’t seem to find that video.

  • cron@feddit.org
    link
    fedilink
    Deutsch
    arrow-up
    10
    ·
    4 months ago

    Or put it in the fridge a few hours before you want to drink it, and not only five minutes or so.