I have a friend who set up a Dreame L10s Ultra. I helped them solder the breakout board, and was there when they flashed the new firmware. Relatively straight forward! Just follow the guide on the website and you should be good.
The robot is now accessible only on the local network, and they got it working in Home Assistant. The only feature that is missing now is direct camera view, which the original robot had. Basically, you could get a live feed of the robot’s camers at any time. Looked fun, but it was not necessary.
Just checked out Valetudo. Gotta love the FOSS community. Can I ask if you’ve used it? If so, which vacuum did you set it up on?
I have a friend who set up a Dreame L10s Ultra. I helped them solder the breakout board, and was there when they flashed the new firmware. Relatively straight forward! Just follow the guide on the website and you should be good.
The robot is now accessible only on the local network, and they got it working in Home Assistant. The only feature that is missing now is direct camera view, which the original robot had. Basically, you could get a live feed of the robot’s camers at any time. Looked fun, but it was not necessary.