DEAD ACCOUNT. Lemmy.one does not have active administration and I need to move on. Catch me over at dbzer0: https://lemmy.dbzer0.com/u/empireOfLove2

Yet another Reddit refugee from the great 3rd party app purge of 2023. Obligatory fuck /u/Spez.

  • 6 Posts
  • 25 Comments
Joined 1 year ago
cake
Cake day: June 6th, 2023

help-circle


  • Jpg at 70% will lose a significant amount of detail. It is a “lossy” format, you cant judt compress data for nothing.

    AVIF is significantly more efficient than jpeg, so it loses less image data for higher compression (smaller file sizes).

    JXL supports both lossy and lossless compression, and is supposed to be more efficient yet over AVIF. However it’s got proprietary all over it because Google et al. For thst alone I would shy away from JXL and go AVIF.


  • empireOfLove@lemmy.oneto3DPrinting@lemmy.worldStringing = too cold?
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    9 months ago

    Often a combination of temp too high, not enough retraction, or water contaminated filament.

    If the plastic in the hot end is too hot it will keep “running” out of the nozzle after retraction and you’ll get strings. Similarly if you don’t retract enough to actually pull plastic out of the nozzle during a rapid move, it will want to keep pushing thru. This is supported by the little blobs it leaves on that angled surface corner its travelling to when stringing, thats excess material squeezing out during its rapid moves then being left on that wall.
    And if there’s water in your filament all bets are off on how it’ll behave.

    215 is pretty warm for that esun PLA especially if you’re using the stock brass nozzle, try bumping that down to 205 or even 200, and increase your retraction speed and distance settings in prusaslicer a tiny amount (0.1mm distance, 2mm/s speed at a time until you see improvement is plenty)

    Use a temperature calibration tower to test things out.





  • Aside from hard science and engineering degrees where the technical knowledge is a foundation for what you’ll learn in industry, a college degree is simply a piece of paper that says “I received a balanced education and have my life together enough to focus, manage time, and complete tasks reliably for 4 years straight.” Rarely do you ever use most of the knowledge you gained in college besides the aforementioned life management skills.














  • Get. Rid. Of. Their. Router.

    ISP provided networking routers are inherently garbage. They don’t want users messing with that, because your average user doesn’t even know what the fuck an ethernet cable is and will break everything by fucking around in it.

    Run your own router and put theirs into modem only mode with routing and wifi disabled. If that’s not an option ask their tech support if you can buy your own DOCSIS/fiber modem (or whatever hardware you use) and return their hardware. If they also don’t allow that… well, switch or just suck it and deal with it while the ISP rubs their nipples some more.