so it seems that without any config, the traffic passes from wlan1 to wlan0’s network flawlessly; but traffic from wlan0 network stops at the Android device, even with iptables -P FORWARD ACCEPT, so I’m clueless on what to do next

how could I set up NAT like this ? thanks

ip r

default via 192.168.15.1 dev enp3s0 proto dhcp src 192.168.15.32 metric 100
192.168.15.0/24 dev enp3s0 proto kernel scope link src 192.168.15.32 metric 100
192.168.38.0/24 via 192.168.15.21 dev enp3s0    

Relevant

you install program A, it needs and installs libpotato then later you install program B that depends on libfries, and libfries depends on libpotato, however since you already have libpotato installed, only program B and libfries are installed The intelligence behind this is called a package manager

In windows when you install something, it usually installs itself as a standalone thing and complains/reaks when dependencies are not met - e.g having to install Visual C++ 2005-202x for games, JRE for java programs etc

instead of making you install everything that you need to run something complex, the package manager does this for you and keep tracks of where files are

and each package manager/distribution has an idea of where some files be stored

You can freely manipulate NTFS in Linux. Just make sure your distribution has, after kernel >=5.15, enabled it, otherwise you may need to install the ntfs-eg driver. Other than that, Ach Wiki has info that may help you on any distro:

https://wiki.archlinux.org/title/NTFS

I have done something similar to what you want to do, just needed the ntfs-3g driver installed and “Disks” (gnome disks) application would mount/read/write the disks as usual

Timeshift, make sure to “include hidden files” to recover any configuration for desktop environments

After a few mess ups, you may find yourself not needing to backup everything, only the file(s) that messed up, and that’s still a good thing to have Timeshift for

IP is like an address to a big skyscraper where a company operates. You are the delivery man and must go to 201.154.76.19 and deliver something. When you get at the reception, you tell them you have a package to deliver to Mrs HTTPS, at room (port) 443. Since Mrs HTTPS is well known and has cleared your entry before, you’re allowed to enter this room and only this room.

If you were to get at the same address and try to access other rooms you would either get refused because they are closed, or if open, someone would specifically need to be in the room so you can deliver something

Malicious actors that wanted access to the building could try to disguise their deliveries and enter the building, that’s why the default policy of most firewalls is “reject” and you specifically need to open a port and have a program listening to it if you want incoming connections.

Used to be messing with kernel arguments and installing/tweaking boot parameters. That was until Grub broke, I learned systemd-boot and chrooting into the system via live USB

Now if I break anything it’s just a matter of “sigh, let me get the USB and type a few commands”

Mind sharing whhich situations would a timecard be useful ? Probably something that requires enhanced time precision, I just can’t figure it out

Depends on config, ArchWiki recommends optmizing some sysctl values to take advantage of it

it generally starts kicking in after >60% RAM usage even with this config

These updates land on testing quickly, however due to the several packages updated at once, they all need to be tested by volunteers, and only when all of them are signed it’s pushed out of testing

That’d be over 1TB with zram on

Considering it’s almost always 30°C+ 60%+ RH at least half of the year where I live, yes

Refrigerating them increases their shelf life significantly in these conditions

It’s probably less effective in other cooler and drier climates

Happened once around two years ago, s botched update from mainstream or something like that. Made me learn systemd boot which is simple and never EVER use grub again

Already switched to AMD to enjoy it

I figured the root cause of the problem and a workaround. Journalctl shows this info when starting SVP:

• Video: 0 GPU OpenCL device(s) on rusticl [OpenCL 3.0] (Mesa/X.org)*

this thread says rusticl is broken

https://www.svp-team.com/forum/viewtopic.php?id=3167&p=17

therefore disabling hardware acceleration, for now, makes svp work again

deleted by creator

deleted by creator

deleted by creator