• TimeNaan@lemmy.world
    link
    fedilink
    arrow-up
    44
    ·
    15 days ago

    Yeah but is the voltage correct? It should be 5V to charge a phone over USB, is that part of the VGA spec?

    • zurohki@aussie.zone
      link
      fedilink
      English
      arrow-up
      19
      arrow-down
      1
      ·
      15 days ago

      With USB power delivery, you can get 9V, 12V or higher over USB. Usually the device requests higher voltage from a PD charger, but it’s not impossible for a modern device to be able to cope with just having 12V shoved into it.

      • FishFace@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        15 days ago

        The USB device would have been made wrong if it just shoved 12V down the power lines without negotiating it.

        • zurohki@aussie.zone
          link
          fedilink
          English
          arrow-up
          1
          ·
          13 days ago

          That’s probably only true for USB power supplies - a USB adapter isn’t set up to do anything with voltage and probably just passes the positive and negative pins through.

          The VGA adapter feeding power back through USB in the first place, yeah, that’s not supposed to happen.

          • FishFace@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            13 days ago

            Put it this way, either the standard on the other end of the adapter specifies 5V, or the adapter doesn’t just pass it through, or the adapter is broken!

    • 9point6@lemmy.world
      link
      fedilink
      arrow-up
      8
      arrow-down
      1
      ·
      edit-2
      15 days ago

      Yeah I don’t think there’s a 5V pin for VGA.

      I think if we had the scenario where we had a higher voltage than needed, we could have a toasty voltage regulator making something happen, but going the other way would need boost circuitry unlikely to exist in these parts, in my understanding